https://foshan-star.en.made-in-china.com/
Description of the Equipment
1.1 Brief introduction
The furnace includes loading table, heating section with top forced air convection,quenching and
cooling section, unloading table, and control system. It is used to manufacture flat and bending
tempered glass for furniture, home appliance, architecture glass, etc.
1.2 Loading Table
The loading table is composed of rubber-covered rollers and Kevlar rope. When the glass is put
onto the rollers, the glass will be conveyed automatically to the entrance of the furnace where it
will be in ready-to-enter-furnace position and the rollers stop moving. It will send the glass into the
furnace once the computer control system gives enter command. 1.3 Heating Section
The structure of the heating section is of a double-layer box type covered with thermos-insulation
material. Inside the section there is a conveyor system with high temperature resistant ceramic
rollers. Heating elements and radiation plates are installed on the upper layer and lower layer of
this section. The upper layer radiation plate is special heat resistant and anti-corrosion cast
material. The heating element is of an integrated part with spiral type resistance erected on
ceramic part, it's easy to replace. When the glass is going to enter the furnace, the front door of
the heating section opens the rolls of the loading table and heating section move at the same
time. When the glass is in the furnace, the front door will close and the glass on the rollers will be
moved back and forth at the distance calculated by the controlling system automatically, so that
the glass will be heated evenly. The upper section can be lifted up for maintenance. The heating
elements are in matrix layout.
1.4 Flat Quenching/Cooling Section
The alloy sections and steel sheet is cold riveted to avoid deformation of heat welding, ensure
effectively the entire flatness at air face of quench. Rational nozzle aperture and arrangement of
air hole guarantee the glass even cooling. The upper and lower quenches are combined with
linkage and individual drives, which can actually control the rational height for air nozzle of
quenches. Matched with balance control of upper and lower air amount, the top and bottom of the
glasses can reach to optimum heat radiation, so as to ensure the flatness of tempering glass.
1.5 Unloading Table
The unloading table is the similar as the loading table. When the glass is transported to the end of
the conveyor, the rollers will stop, and the glass can be taken away by hand, or by robot, if there
is available at the customer's factory.
1.6 Control System
Technical Parts
Technical Specifications
| Model | STG-AB1824-4B |
| Flat Glass size | Max loading area | 1830*2440mm |
| Max Glass Size | 1830*2440 5-19mm 1200*1800 4mm glass |
| Min.Glass Size | 250*300mm |
| Glass thickness range | 4-19mm |
| Finish product rate | >=98% |
Power consumption
Flat: ≤4 kwh/M2
Productivity:
| Glass thickness(mm) | Glass tempered cycle(load/hour) | note |
| 4(half charge) | 20-22 | The size, producing area and color of glass panel will cause the production difference. The production of glass plate with small size and deep color will be slightly larger. |
| 5 | 16-18 |
| 6 | 14-16 |
| 8 | 10-12 |
| 10 | 9-10 |
| 12 | 7-8 |
| 15 | 5-6 |
| 19 | 3-4 |
Suitable glass sorts
Tinted glass
Patterned glass
Silk screen printing glass
Clear float glass
Low-e glass
Supply Scope
Loading table
Heating section(furnace)
Quenching and Cooling section
Unloading table
Associated electrical and control equipment
Blower system
Modem with long distance maintenance system
AC Battery Emergency driving system
Long-distance trouble maintenance
matrix heating system for evenness heating in the heating furnace
Controlling System The whole control procedure, software of industrial computer and PLC are developed by
Foshan Star Glass Machinery Co., Ltd. The owner of all intelligence property right.
Foshan Star Glass Machinery Co., Ltd.. is responsible for the upgrading of the software
system. PLC is SIMENS brand.
Industrial computer is ADVANTECH product from TAIWAN
Inverters are original products for driving equivalent ones.
Equipment Structure & Manufacturing Standard photos
Sea worthy packing
Company Profile:
Founded in 2010, Foshan Star Glass Machinery Co., Ltd. is a high-tech enterprise specializing in the
production, research and development and sales of glass deep processing machinery. The company is
located in Foshan City, a major glass machinery center.
The company is committed to the production of glass radiant tempering furnace, convection tempering
furnace, flat bending dual-purpose tempering furnace, automotive glass bending furnace, nonautoclave
PVB laminating production line.
After years of hard work and exploration, the company has obtained a number of national patents, and
its technology is ahead of the domestic level. The products sell well all over China and are exported to
Australia, the United States, the Middle East, India, Vietnam, South America and other places.
Companies adhering to the principle of quality first, service-oriented, and constantly improve the
company's level and product quality, and strive to create a skilled, high-quality team. We will sincerely
cooperate with new and old customers at home and abroad with sincerity and jointly develop the
bright road of glass machinery manufacturing industry.
cooperation partner
After Sales Service
nExhibition
FAQ
1. who are we?
We are based in Guangdong, China, start from 2011,sell to South America(30.00%),Southeast Asia(20.00%),Mid East(15.00%),Eastern Europe(10.00%),Africa(10.00%),North America(10.00%),Western Europe(3.00%),Eastern Asia(2.00%). There are total about 11-50 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Glass Machine,Glass Furnace,Glass Bending Furnace,Glass Bending And Tempering Furnace,Glass Machines
4. why should you buy from us not from other suppliers?
Our company has a professional R & D team and a strict quality management system. 10 years of export experience. Mature after-sales installation team.
5. what services can we provide?
Accepted Delivery Terms: FOB,CIF,EXW,DDP;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Japanese,Arabic,French,Russian
